NOTE ** This section is based on the products of Tub-Master, LC, which is located at:
NOTE ** 413 Virginia Drive
NOTE ** Orlando, FL 32853-6925
NOTE ** Tel: (407) 898-2881
NOTE ** Fax: (407) 898-3856
NOTE ** Order Dept.: (800) 327-1911
NOTE **
NOTE ** Tub-Master, LC manufactures barrier-free shower doors and other shower accessories.
NOTE **
NOTE ** SECTION 10825 - BARRIER-FREE SHOWER DOORS, Copyright 1998, The Architect's Catalog, Inc.
PART 1 GENERAL
1.1 SECTION INCLUDES
A. Continuous folding barrier-free shower doors.
1.2 RELATED SECTIONS
NOTE ** Delete sections below not relevant to this project; add others as required.
A. Section 09300 - Ceramic Tile.
B. Section 10810 - Toilet Accessories.
C. Section 15410 - Plumbing Fixtures.
D. Section _____ - __________________________.
1.3 REFERENCES
NOTE ** Delete references from the list below that are not actually required by the text of the edited section; add others as required.
A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
B. ANSI A117.1 - Providing Accessibility and Usability for Physically Handicapped People.
C. ANSI Z97.1 - Glazing Materials Used in Buildings.
D. HUD
E. Federal Motor Vehicle Safety Standard No. 302.
F. Federal MH SS Section 280.203(2)(6).
G. USA Standard Institutional Code - Z97.1.
H. ASTM F 446 - Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area.
I. ___________________________.
1.4 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Manufacturer's catalog data, detail sheets, and specifications.
C. Shop Drawings: Prepared specifically for this project; show dimensions of shower doors and interface with other products.
NOTE ** Delete the following paragraph if samples are not required.
D. Samples: Color charts showing full range of available colors and finishes for selection of exposed materials.
E. Installation Instructions: For types of shower doors required.
1.5 DELIVERY, STORAGE AND HANDLING
A. Inspect materials upon delivery to assure that specified products have been received and are undamaged.
B. Deliver, store, protect and handle materials and components in accordance with the manufacturer's recommendations to prevent damage.
PART 2 PRODUCTS
2.1 MANUFACTURERS
A. Acceptable Manufacturer: Tub-Master, LC; 413 Virginia Drive, Orlando, FL 32853-6925; ASD. Tel: (407) 898-2881, Order Dept.: (800) 327-1911, Fax: (407) 898-3856.
B. Requests for substitutions will be considered in accordance with provisions of Section 01600.
NOTE ** Delete paragraph above or below; coordinate with Division 1 requirements.
C. Substitutions: Not permitted.
D. Provide all shower doors from a single manufacturer.
2.2 SHOWER DOORS, GENERAL
NOTE ** Select standards below that are required for the project.
A. Comply with the following standards:
1. HUD.
2. Federal Motor Vehicle Safety Standard No. 302.
3. USA Standard Institutional Code - Z97.1.
4. ANSI Z97.1.
5. Federal MH SS Section 280.203(2)(6).
B. Opening Sizes: Determined from field measurements.
2.3 CONTINUOUS FOLDING BARRIER-FREE SHOWER DOORS
NOTE ** The "FBS" Series door is continuous folding with a panel/hinge design allowing door to open and fold completely back. A flexible vinyl water dam/aluminum bottom track, offered individually, allows wheelchair and rolling shower chair access. When closed, the door fits snugly against the flexible dam.
A. "FBS Bath-Master Barrier Free" Series:
NOTE ** The first FBS model below is intended for residential use, the second for hospitals and nursing homes.
1. FBS Model Shower Doors: 74 inches (1.880 m) high; 6463-T5 architectural grade aluminum alloy frame and track, anodized and bright-dipped; high-impact heat-resistant styrene panels and hinges; molded plastic wheels, brackets, panel stops, and handles.
2. FBS Model Shower Doors: 82-3/4 inches (2.102 m) high; 6463-T5 architectural grade aluminum alloy frame and track, anodized and bright-dipped; high-impact heat-resistant styrene panels and hinges; molded plastic wheels, brackets, panel stops, and handles.
NOTE ** Select one subparagraph below.
a. Frame: Chrome.
b. Frame: Gold.
c. Frame: White.
d. Frame: Almond.
NOTE ** Select one subparagraph below.
e. Panels and Hinges, Color: White.
f. Panels and Hinges, Color: Almond.
g. Panels and Hinges, Color: Crystal Gold.
h. Panels and Hinges, Color: Crystal Silver.
B. Aluminum Bottom Track: 6463-T5 architectural grade aluminum alloy frame and track, anodized.
NOTE ** Select one subparagraph below.
1. Chrome.
2. Gold.
NOTE ** Tub-Master, LC offers individually the following safety and comfort options for the Bath-Master Barrier Free series. Delete those not required or specified in other sections.
C. Water Dam: Polyvinyl chloride.
D. Shower Base: Lucite XL acrylic reinforced with fiberglass; include drain assembly.
NOTE ** Select shower base color from two subparagraph below. White is standard; other colors available by special order: Black, Country Gray, Desert Bloom, Dusty Rose, Evergreen, Fawn Beige, French Vanilla, Heron Blue, Innocent Blush, Mexican Sand, Navy, Parchment, Peach Bisque, Raspberry Ruby, Seafoam Green, Shell Taupe, Teal, Tender Gray, and Wild Rose.
1. Color: White.
2. Color: __________________.
NOTE ** Select one subparagraph below. Polished Chrome is standard; metallic finishes and Gold are optional.
E. Hand-Held Shower: Alsons Corporation one-hand one-touch pause shower head, mounting clip, 82-inch (2.083 m) hose.
NOTE ** Select one subparagraph below. Support bar allows positioning of shower head as stationary shower.
1. Wall Mount Bracket.
2. Support Bar: ASTM F 446; 24-inch by 1-1/4 inch (610 x 31 mm) "Standard" model, polycarbonate and ABS resin, uniform color throughout.
3. Support Bar: ASTM F 446; 24-inch by 1-1/4 inch (610 x 31 mm) "Knurled" model, polycarbonate and ABS resin with helical knurling along entire length, uniform color throughout.
F. Grab Bars: Polycarbonate and ABS resin, uniform color throughout; meeting Standard Consumer Safety Specifications per ASTM F 446 and verified by NAHB.
NOTE ** Select one subparagraph below.
1. Diameter: 1-1/4 inch (31.7 mm).
2. Diameter: 1-1/2 inch (38.1 mm).
NOTE ** Select one subparagraph below.
3. Texture: Ribbed along entire length.
4. Texture: Helical knurling along entire length.
NOTE ** Select grab bar color from subparagraphs below.
a. Provide adjustable center brackets every 16 inches (406 mm) for bars 32 inches (812 mm) and longer.
2.4 ACCESSORIES
A. Assembly Screws: Stainless steel.
PART 3 EXECUTION
3.1 EXAMINATION
A. Verify equipment rough-in before proceeding with work.
B. Coordinate with other trades for proper opening dimensions required for installation.
3.2 PREPARATION
A. Schedule work to ensure an orderly and expeditious manner installation.
3.3 INSTALLATION
A. Install shower doors and accessories in accordance with manufacturer's instructions; comply with standards required by authorities having jurisdiction.
B. Cut grab bars to fit spaces; install to comply with applicable load requirements and ADA guidelines.
C. Install equipment plumb, square, and straight, without distortion; securely anchor.
3.4 ADJUSTING AND CLEANING
A. Adjust for smooth operation.
B. Clean surfaces as recommended by manufacturer, rendering work in new and unused appearance.
C. Clean adjacent construction and surfaces soiled in the course of installation of this work.
D. Touch up minor damaged surfaces caused by installation. Replace damaged components as directed by Architect.
3.5 PROTECTION
A. Provide protective measures to prevent equipment and surfaces from exposure to other construction activity.
